Revolutionize Your Strap Winding Process

Strap Max is compatible with tie-down winches that have webbing up to 3½" wide and an end cap width of 2¼". This covers most standard flatbed trailer configurations. Always verify your equipment specifications before ordering.

Most drivers report 60-70% time savings on strap winding. Instead of manually turning your wrist 1,200+ times per load, Strap Max handles the work in a fraction of the time, allowing you to complete loads faster and reduce physical strain.

Minimal maintenance is required. Apply 5-6 drops of oil to the oil port every 1-2 months using the provided Allen key. Always store the tool in an upright position and keep it clean and dry. This simple routine will keep your Strap Max operating smoothly for years.

Do not use Strap Max on winches with excessive dirt, sand, or rust buildup. First clean your winches thoroughly with a high-pressure sprayer. The end cap must turn freely by hand before using Strap Max. This protects both your tool and your winches.

Yes! We offer free shipping on all orders to Canada and the United States. Delivery typically takes 3-7 business days.

If Strap Max doesn't meet your expectations, you may return it in original condition for a full refund. Customer is responsible for return shipping unless the product is defective. Contact [email protected] to initiate a return.

While Strap Max is built for rugged professional use, you should never use it on frozen or ice-covered straps. Frozen straps are rigid and won't wind properly, which can damage the tool's mechanism and break the flat springs. If your straps are frozen, allow them to thaw completely before winding, or move to a heated area if available. In very cold conditions, ensure the equipment has been allowed to reach a workable temperature before use. Store the tool in your truck cab or a warm area during winter months.